2003002 - Bear-Penguin

2003002

Dimensions product:

Height                    :115,00 cm / 45,28 inches.

Width                     :47,00 cm / 18,50 inches.

Length                   :71,50 cm / 28,15 inches.

Dimensions shipping carton:

Height                    :119,00 cm / 46,85 inches.

Width                     :51,00 cm / 20,08 inches.

Length                   :82,00 cm / 32,28 inches.

Packaging weight:              20,33 kg / 44,72 lbs

 

Complete including:

-Mirror glass silver-plated

-Water tap self-closing 1/2”

-Stainless steel washbowl ø 32

-Stainless steel adapter ring

-Siphon PVC

-Flexible water supply 1/2” x 3/4” and 50 cm / 19,69 inches long.

-Mounting screws in colour.  

-Attention! Automatic mixing or water (pressure) control not included.

 

Material specification:

This product is made of 5 to 6mm thick polyester, and is coated with a matt varnish. With this coating the product is resistant against all kinds of cleaning materials. We use the same coating on our products as been used in the car industry, so you can clean our products just like a car. (do not use an abrasive sponge) Also you can clean our products with water pressure.

 

Important tips for installation: 

  • Let your installation be performed by a specialised installation company.
  • Screw the product securely to the wall with a rubber ring for the screw. This prevents the product may crack if you tighten it too hard.
  • Don't tighten the screw (which is used to secure the drain plug for installation of the siphon) too hard because  otherwise the stainless steel washbowl can bow.
  • After mounting the product, put some putty around the product so water and dirt gets no chance to get behind the  product, also for extra reinforcement. 
  • Put some putty around the stainless steel washbowl so water and dirt gets no chance to get behind the product.
  • We advice you to use a silicon putty for gluing around the product and use a panel and construction adhesive for gluing the stainless steel washbowl in the product.
  • c to c of the drain which leaves the wall is: 28 cm / 11,02 inches without the optional stage for the Bear-Penguin.

 

Assembly procedure:

  1. Mount the self-closing water tap in the appropriate hole, fitting should be done from the bottom side. Take care that the black rubber ring is mounted between the tap and the product.
  2. Mount the connecting hose secure to the tap at the bottom side.
  3. Glue the drain plug to the stainless steel washbowl with appropriate putty.
  4. Hold the adapter ring against the bottom side of the stainless steel washbowl.
  5. Mount the siphon to the bottom side of the adapter ring.
  6. Mount the screw of the siphon from above, trough the drain plug to secure the ring between the drain plug and the siphon.
  7. Hold the product to the wall so you can mark the 3 mounting holes on the wall.
  8. Drill the marked holes.
  9. Mount the plugs in the wall.
  10. Glue the stainless steel washbowl with all accessories secure in the product.
  11. Connect the flexible water supply and siphon to the wall.
  12. Mount the product to the wall with the colored mounting screws.
  13. After mounting the product, put some putty around the product so water and dirt gets no chance to get behind the product.